We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
RDM Responder Testing
From wiki.openlighting.org
As part of the Open Lighting Project we've developed a suite of tests for RDM responders. This enables manufacturers to check how well a RDM device conforms to the E1.20 specification. The tests cases are written in Python, and use the Open Lighting Architecture to communicate with devices.
Have a question? Check the Responder Testing FAQ or ask on the RDM Test Group.
Supported Devices
The following RDM Controller devices are supported:
- RDM-TRI - the doesn't support the Discovery tests yet.
- DMXter4 RDM / MiniDMXter
- Robe Universal Interface (latest firmware required)
- DMX USB Pro (2.4 firmware required)
Downloading & Installing the Test Software
The tests are built on top of the Open Lighting Architecture which runs on Mac OS, Linux and FreeBSD. If you're a Windows user, or want a self-container testing device, the easiest way to get started is to use the Raspberry Pi. It's a $35 embedded linux computer and you can run all the tests through a web browser without ever having to log in.
Raspberry Pi Instructions
- Install OLA on your Raspberry Pi by following the Instructions.
Mac, Linux or FreeBSD Instructions
If you want to run the tests from your own computer:
- Follow the OLA Installation Instructions. If you're installing from source you need to add --enable-rdm-tests when running ./configure . If you use Debian or Ubuntu packages make sure you install the ola-rdm-tests package. The tests are quite stable at this point, so unless you have a reason to use the Git version I'd stick to using the monthly releases.
Running the Tests
The tests can be run from either the command line or a web browser. If you're new to using the command line we suggest you use the Web UI. It can do everything the command line tests can do.
Interpreting the Output
See the Guide to Interpreting Test Output. If you decide you want to add some additional tests read the Guide to Writing Responder Tests.
Test Coverage
As of 7th July 2012 the following PIDs in E1.20 aren't tested:
- STATUS_MESSAGES
- STATUS_ID_DESCRIPTION
- SUB_DEVICE_STATUS_REPORT_THRESHOLD
- RESET_DEVICE
