Personal tools
The Open Lighting Project has moved!

We've launched our new site at This wiki will remain and be updated with more technical information.

Difference between revisions of "OLAGuruPlug"


Jump to: navigation, search
Line 9: Line 9:
Add the following line to /etc/apt/sources.list:
Add the following line to /etc/apt/sources.list:
   deb ./
   deb ./

Revision as of 22:34, 16 May 2010

This describes how to setup OLA on a GuruPlug. These devices make excellent low cost DMX512 nodes.


This assumes you have a shell on the guru plug and that it can contact the internet to download the packages. Note that the default guru plug is insecure and comes with a lot of extras (samba, myqls, lighthttpd etc.) that aren't required. Fixing this is outside the scope of this tutorial.


Add the following line to /etc/apt/sources.list:

 deb ./

Then apt-get install ola:

 $ apt-get install olad


Add a user ola for the daemon to run as:

 $ adduser ola 

If you intend to use USB devices, you need to add this user to the plugdev & dialout groups. Modify the lines in /etc/group:


Finally add any udev rules that you'll need. See OLA Device Specific Configuration


Change to the ola user and the start the daemon:

 $ su ola
 $ olad -l 3