Personal tools
The Open Lighting Project has moved!

We've launched our new site at This wiki will remain and be updated with more technical information.



Revision as of 09:09, 23 April 2008 by Beier (talk | contribs) (Added note about RDM, corrected spelling)
Jump to: navigation, search
Dmxusb pro.jpg

Made by: Enttec
{{ #if: | Free! }}{{ #if: yes | Windows Support }}{{ #if: yes | Linux Support }}{{ #if: yes | Mac OS X Support }}{{ #if: yes | Sends DMX }}{{ #if: yes | Receives DMX }}{{ #if: yes | RDM Support }}{{ #if: | MIDI Support }}{{ #if: | HTTP Support }}

The pro widget unlike it's little brother (The Open DMX USB) contains a microprocessor (ATMEGA88) responsible for framing and transmission, or reception of dmx. Also it's USB interface is a FTDI FT245BM, so VCP (virtual com port) drivers make programming easy as opening a serial port and sending/receiving!

It has 1500v dmx line isolation, A green LED which indicates RX or TX activity, and gold plated Neutrik XLR's (1xmale, 1xfemale wired in parallel). The timings of the transmitted DMX signal can be adjusted. According the Enttec web site, it has limited RDM support, and only in some firmware versions, see [1] for details.

Related Products: