We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
Difference between revisions of "DMX USB Pro"
From wiki.openlighting.org
(added MiniStageConsole as related product) |
(Added note about RDM, corrected spelling) |
||
| Line 8: | Line 8: | ||
| − | The pro widget unlike it's little brother (The Open DMX USB) contains a microprocessor (ATMEGA88) responsible for framing and transmission, or reception of dmx. Also it's USB interface is a FTDI FT245BM, VCP (virtual com port) drivers make programming easy as opening a serial port and sending/receiving! | + | The pro widget unlike it's little brother (The Open DMX USB) contains a microprocessor (ATMEGA88) responsible for framing and transmission, or reception of dmx. Also it's USB interface is a FTDI FT245BM, so VCP (virtual com port) drivers make programming easy as opening a serial port and sending/receiving! |
| + | It has 1500v dmx line isolation, A green LED which indicates RX or TX activity, and gold plated Neutrik XLR's (1xmale, 1xfemale wired in parallel). | ||
| + | The timings of the transmitted DMX signal can be adjusted. | ||
| + | According the [[Enttec]] [http://enttec.com web site], it has limited [[RDM]] support, and only in some firmware versions, see [http://www.enttec.com/index.php?main_menu=Products&prod=70304&show=firmware] for details. | ||
<b>Related Products:</b> | <b>Related Products:</b> | ||
Revision as of 09:09, 23 April 2008
Link: http://www.enttec.com/index.php?main_menu=Products&prod=70304&show=description&name=dmxusbpro
Made by: Enttec
{{ #if: | 
}}{{ #if: yes | 
}}{{ #if: yes | 
}}{{ #if: yes | 
}}{{ #if: yes | 
}}{{ #if: yes | 
}}{{ #if: yes | 
}}{{ #if: | 
}}{{ #if: | 
}}
The pro widget unlike it's little brother (The Open DMX USB) contains a microprocessor (ATMEGA88) responsible for framing and transmission, or reception of dmx. Also it's USB interface is a FTDI FT245BM, so VCP (virtual com port) drivers make programming easy as opening a serial port and sending/receiving!
It has 1500v dmx line isolation, A green LED which indicates RX or TX activity, and gold plated Neutrik XLR's (1xmale, 1xfemale wired in parallel). The timings of the transmitted DMX signal can be adjusted. According the Enttec web site, it has limited RDM support, and only in some firmware versions, see [1] for details.
Related Products:
