Difference between revisions of "OLAGuruPlug"

Revision as of 09:50, 22 May 2010

This describes how to setup OLA installed on a GuruPlug. These devices make excellent low cost DMX512 nodes. For a list of compatible USB devices see the main OLA page.

Features:

• 2 Gig Ethernet ports
• Wifi 802.11 b/g (not recommended for lighting control)
• 2 USB ports
• Cheap ($99US)

Prerequisites

This assumes you have a shell on the guru plug and that it can contact the internet to download the packages. Note that the default guru plug is insecure and comes with a lot of extras (samba, mysql, lighthttpd etc.) that aren't required. Fixing this is outside the scope of this tutorial.

Installation

Add the following line to /etc/apt/sources.list:

 deb http://www.nomis52.net/data/ola-arm ./

Then apt-get install ola:

 $ apt-get update
 $ apt-get install olad

Setup

Add a user ola for the daemon to run as:

 $ adduser ola 

If you intend to use USB devices, you need to add this user to the plugdev & dialout groups. Modify the lines in /etc/group:

 dialout:x:20:ola
 plugdev:x:46:ola

Finally add any udev rules that you'll need. See OLA Device Specific Configuration

Running

Change to the ola user and the start the daemon:

 $ su ola
 $ olad -l 3

Now connect the the GuruPlug on port 9090 with your browser to configure it.

Questions

Ask on the mailing list http://groups.google.com/group/open-lighting