Personal tools
The Open Lighting Project has moved!

We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.

A RDM Transceiver Qualification Tester

From wiki.openlighting.org

Jump to: navigation, search

Link: http://www.goddarddesign.com/driver_gts.html

Dmx 041 300 300.jpg

{{ #if: | Free! }}{{ #if: | Windows Support }}{{ #if: | Linux Support }}{{ #if: | Mac OS X Support }}{{ #if: | Sends DMX }}{{ #if: | Receives DMX }}{{ #if: yes | RDM Support }}{{ #if: | MIDI Support }}{{ #if: | HTTP Support }}
Goddard Design is proud to introduce an important test tool for anyone designing or verifying a new E1.20 (RDM) design. Our RDM Driver Qualification Test Set simplifies the driver tests required by the Standard.

If you are designing an RDM device, the selection of the line driver is not as simple as it once was. Just because an integrated circuit is labeled as a EIA485 driver does not mean that it is appropriate for RDM use. Electrical requirements have been added to increase the reliability of the protocol. For the purposes of E1.20 (RDM) the line transceiver IC and any bias components are jointly considered to be the line driver, and together must be qualified to drive the EIA485/E1.20 line.