Personal tools
The Open Lighting Project has moved!

We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.

USBone

From wiki.openlighting.org

Jump to: navigation, search
USBone.jpg

Link: http://www.madrix.com/en/home/products/usbone.html
Made by: inoage
{{ #if: | Free! }}{{ #if: yes | Windows Support }}{{ #if: | Linux Support }}{{ #if: | Mac OS X Support }}{{ #if: yes | Sends DMX }}{{ #if: yes | Receives DMX }}{{ #if: | RDM Support }}{{ #if: | MIDI Support }}{{ #if: | HTTP Support }}


One of the world's smallest USB-to-DMX512 or DMX512-IN interfaces. Made in Germany.

The USBone allows you to control 512 DMX channels using MADRIX.
But an additional MADRIX KEY (i.e. a software license) is necessary.

• DMX-IN/OUT with 5-pin NEUTRIK XLR Port
This device allows you to send or receive data via MADRIX using 512 DMX channels. A gender changer with 5-pin male to 3-pin or 5-pin male is required for DMX-IN.

• USB 2.0 Standard
The latest USB 2.0 standard is fully supported to allow for a higher maximum speed of 480Mbit/s.

• Power Over USB
The interface is powered directly via the USB port and does not need an additional power supply.

• High Quality
The USBone represents high quality made in Germany and is very reliable.

• Hot Swapping & Plug and Play
Devices can be connected to and disconnected from the computer during use and without a reboot.

• Remote Control
MADRIX can be controlled remotely using the built-in DMX-IN protocols.

• Frame Rate Stability
Up to 60 devices can be connected to a single USB host controller without having any frame rate problems. (60 DMX512 interfaces amount to 30,720 DMX channels.)

Please connect every USBone to an active USB 2.0 port or use an USB 2.0 hub with a power supply.

Related Products: