Personal tools
The Open Lighting Project has moved!

We've launched our new site at This wiki will remain and be updated with more technical information.



Revision as of 15:04, 30 July 2010 by Madrix (talk | contribs) (Created page with 'Category:USB right Link:<br> Made by: inoage <br> {{Features|win=yes|tx=yes|rx=yes}} '''The NEO is a s…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Made by: inoage
{{ #if: | Free! }}{{ #if: yes | Windows Support }}{{ #if: | Linux Support }}{{ #if: | Mac OS X Support }}{{ #if: yes | Sends DMX }}{{ #if: yes | Receives DMX }}{{ #if: | RDM Support }}{{ #if: | MIDI Support }}{{ #if: | HTTP Support }}

The NEO is a small, reliable, and easy to use DMX512 USB interface.
One MADRIX software license for 512 DMX channels is already included.
Made in Germany.

Only two simple steps are necessary:
1. Download the MADRIX software for free.
2. Connect the MADRIX NEO to your computer. Ready!

• DMX-IN/OUT with 5-pin NEUTRIK XLR Port
The NEO allows you to send or receive data via MADRIX using 512 DMX channels. A gender changer with 5-pin male to 3-pin or 5-pin male is required for DMX-IN.

• USB 2.0 Standard
The latest USB 2.0 standard is fully supported to allow for a higher maximum speed of 480Mbit/s.

• Power Over USB
The interface is powered directly via the USB port and does not need an additional power supply.

• High Quality
Made from light but solid metal it features a robust enclosure and an eye-catching design.

• Hot Swapping & Plug and Play
Devices can be connected to and disconnected from the computer during use and without a reboot.

• Remote Control
MADRIX can be controlled remotely using the built-in DMX-IN protocols.

• Frame Rate Stability
Up to 60 NEOs can be connected to a single USB host controller without having any frame rate problems. (60 DMX512 interfaces amount to 30,720 DMX channels.)

Please connect every NEO to an active USB 2.0 port or use an USB 2.0 hub with a power supply.

Related Products: