NEO

Link: http://www.madrix.com/home/products/neo.html
Made by: inoage
{{ #if: | }}{{ #if: yes | }}{{ #if: | }}{{ #if: | }}{{ #if: yes | }}{{ #if: yes | }}{{ #if: | }}{{ #if: | }}{{ #if: | }}

The NEO is a small, reliable, and easy to use DMX512 USB interface.
One MADRIX software license for 512 DMX channels is already included.
Made in Germany.

Only two simple steps are necessary:
1. Download the MADRIX software for free.
2. Connect the MADRIX NEO to your computer. Ready!

• DMX-IN/OUT with 5-pin NEUTRIK XLR Port The NEO allows you to send or receive data via MADRIX using 512 DMX channels. A gender changer with 5-pin male to 3-pin or 5-pin male is required for DMX-IN. • USB 2.0 Standard The latest USB 2.0 standard is fully supported to allow for a higher maximum speed of 480Mbit/s. • Power Over USB The interface is powered directly via the USB port and does not need an additional power supply. • High Quality Made from light but solid metal it features a robust enclosure and an eye-catching design.

• Hot Swapping & Plug and Play Devices can be connected to and disconnected from the computer during use and without a reboot. • Remote Control MADRIX can be controlled remotely using the built-in DMX-IN protocols. • Frame Rate Stability Up to 60 NEOs can be connected to a single USB host controller without having any frame rate problems. (60 DMX512 interfaces amount to 30,720 DMX channels.) Please connect every NEO to an active USB 2.0 port or use an USB 2.0 hub with a power supply.

Related Products:

• MADRIX
• USBone