The Open Lighting Project has moved!
We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
OLA Device Specific Configuration
From wiki.openlighting.org
StageProfi
This comes in two flavors, a USB model and an Ethernet/IP model.
device = /dev/ttyUSB0 device = 192.168.1.250
USB Pro
Mac
Make sure you install the drives: http://www.ftdichip.com/Drivers/VCP.htm
After a restart run:
ls /dev/cu.usbserial-*
Make sure your ~/.ola/ola-usbpro.conf file matches the path above:
device_dir = /dev device_prefix = ttyUSB device_prefix = cu.usbserial-
i.e. Look for devices at /dev/ttyUSB* , /dev/cu.usbserial-*
OLA also comes with a tool to update the firmware on a USB Pro:
./tools/usbpro_firmware -d /dev/cu.usbserial-0000101D -f <firmware_file>
