OLA developer info

Or LLA code documentation Link to the LLA main page.

Drivers and platforms

LLA compiles on Linux and Mac and probably also Windows, but not all drivers work everywhere (yet). Here the status can be listed.

Supported Devices/Protocols:

Driver	Linux	Mac OS X	Windows
ArtNet	Linux=Yes	??	??
ShowNet	Linux=Yes	??	??
ESP Net	Linux=Yes	??	??
Sandnet	Linux=Yes	??	??
DMX USB Pro	Linux=Yes	??	No
Open DMX USB 1)	Linux=Yes	??	No
DMX 4 Linux	Linux=Yes	??	No
StageProfi	Linux=Yes	??	No
Pathport	Linux=in testing	??	No
E1.31 / ACN	Linux=development started	??	No

Note 1): Support through the Linux kernel module from Erwin Rol, as detailed in LLA, OpenDMX USB and Q Light Controller Tutorial.

Unsupported USB devices:

• Peperoni Rodin1 (but this is supported directly by QLC)
• Peperoni USBDMX21
• [[Anyma uDMX]
• USB DMX
• Sandsys UMX2
• Sandsys UMX4
• Velleman K8062 (no developer info available?)

Suggestions for content:

• I have difficulties to track the flow of data from it is fetched from the USB Pro until it is printed to the console by the app lla_usbpro. Some diagrams over the structure and data flow diagrams, or text that gives a good overview would be nice
• What is the structure of the plugins?
• What is the interface between the LLA core and LLA plugins?
• What is the interface between the LLA core and other apps/clients to LLA like QLC?
• What is it with the hidden web server?

How is functionality split between the usbpro plugin and the example program?

Ideas for easy configuration

For some users, it will be useful to have a "auto-connect" feature. When a attached device is discovered (either when LLA i started or when a new device is attached), the user could be asked if the available ports (input as well as output) should be patched to the lowest available universes.

• Enable auto-connect ( OFF|connect whatever comes first|connect by stored patch layout)
• Save a given combination of devices (just by type or with unique ID's from serial numbers, USB device ID's etc)

Which devices cannot be autodetected?

Ideas for QLC integration

Here is room for YOUR writing :-)

LLA plugin for the "USB Pro"

label=3 response

• 1. data byte= Firmware version LSB. Valid range is 0 to 255.
• 2. data byte=Firmware version MSB. Valid range is 0 to 255.
• 3. data byte=DMX output break time in 10.67 microsecond units. range=[9-127] (96.03 - 1355.09 micro seconds)
• 4. data byte=DMX output Mark After Break time in 10.67 microsecond units. range=[1-127] (10.67 - 1355.09 micro seconds)
• 5. data byte=DMX output rate in packets per second. range=[1-40]
• x. data byte= some user configuration of the requested size