The Open Lighting Project has moved!
We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
Difference between revisions of "OLA Device Specific Configuration"
From wiki.openlighting.org
(→Mac) |
(→Mac) |
||
| Line 17: | Line 17: | ||
ls /dev/cu.usbserial-* | ls /dev/cu.usbserial-* | ||
| − | + | Make sure your ~/.ola/ola-usbpro.conf file matches the path above: | |
| − | + | device_dir = /dev | |
| + | device_prefix = ttyUSB | ||
| + | device_prefix = cu.usbserial- | ||
| + | |||
| + | i.e. Look for devices at /dev/ttyUSB* , /dev/cu.usbserial-* | ||
OLA also comes with a tool to update the firmware on a USB Pro: | OLA also comes with a tool to update the firmware on a USB Pro: | ||
./tools/usbpro_firmware -d /dev/cu.usbserial-0000101D -f <firmware_file> | ./tools/usbpro_firmware -d /dev/cu.usbserial-0000101D -f <firmware_file> | ||
Revision as of 13:42, 15 December 2009
StageProfi
This comes in two flavors, a USB model and an Ethernet/IP model.
device = /dev/ttyUSB0 device = 192.168.1.250
USB Pro
Mac
Make sure you install the drives: http://www.ftdichip.com/Drivers/VCP.htm
After a restart run:
ls /dev/cu.usbserial-*
Make sure your ~/.ola/ola-usbpro.conf file matches the path above:
device_dir = /dev device_prefix = ttyUSB device_prefix = cu.usbserial-
i.e. Look for devices at /dev/ttyUSB* , /dev/cu.usbserial-*
OLA also comes with a tool to update the firmware on a USB Pro:
./tools/usbpro_firmware -d /dev/cu.usbserial-0000101D -f <firmware_file>
