Revision as of 13:34, 4 June 2013

We run a Buildbot instance for OLA.

• Web UI: http://buildbot.openlighting.org
• IRC: OLA-buildbot-ch in #openlighting-build on irc.freenode.org

We're currently only building ola, but this could be extended to do other projects such as the QT GUI etc.

Master Configuration

The buildbot master configuration is stored in git at https://code.google.com/p/open-lighting/source/browse?repo=buildbot-config . It needs checking out, and symlinking to replace master.cfg in the buildbot master's config directory.

N.B. If the main open-lighting git repository (as opposed to buildbot-config) is ever moved or changed, ensure the master's gitpoller-workdir folder is emptied out, or the poller won't work properly.

Adding a Slave

Buildbot documentation is at http://docs.buildbot.net/current/manual/installation.html#creating-a-buildslave . The steps below should cover everything you need though.

Prerequisites & Warning

Slaves execute code directly from the git repo. Even though submits to the git repo are locked down, this is still a possible attack vector for your machine. For this reason it's best to run build slaves within a virtual machine. TODO: link to some VM solutions.

At the very least you should run the buildslave as a separate user (not root!). Slave passwords aren't stored in the git repo for security, you'll need to get Simon to add new ones.

The buildbot performs full build & test runs with all the options enabled. Please make sure you have all the necessary libraries installed on your system. You need to be able to complete a

autoconf -i
./configure --enable-e133 --enable-rdm-tests --enable-python-libs
make
make check

cycle before proceeding. If you have trouble ask on the mailing list.

If you're running the lint check, you need ccplint.py in your path somewhere, see README.developer for info on how to obtain it.

Buildbot slaves need to connect to buildbot.openlighting.org:9989 . Make sure your firewall allows this. No port forwarding for inbound connections is required.

Debian / Ubuntu Instructions

This requires wheezy or later. For squeeze you can use the easy_install method below.

Build Slave Installation

 sudo apt-get install buildbot-slave

Slave Configuration

Create the slave:

 sudo -u buildbot buildslave create-slave --usepty=0 /var/lib/buildbot/slaves/ola buildbot.openlighting.org:9989 <slave user> <slave password>

Update the slave info, edit the files in /var/lib/buildbot/slaves/ola/info to be relevant to you.

Add config for the slave into /etc/default/buildslave (you'll need to increase the array id if you've got more than one slave on the same host), e.g.:

 SLAVE_ENABLED[1]=1                    # 1-enabled, 0-disabled
 SLAVE_NAME[1]="ola"         # short name printed on start/stop
 SLAVE_USER[1]="buildbot"              # user to run slave as
 SLAVE_BASEDIR[1]="/var/lib/buildbot/slaves/ola"                   # basedir to slave (absolute path)
 SLAVE_OPTIONS[1]=""                   # buildbot options
 SLAVE_PREFIXCMD[1]=""                 # prefix command, i.e. nice, linux32, dchroot

Start the slave

sudo /etc/init.d/buildslave start

Check the log if there are any issues, or confirm the slave is registered at http://buildbot.openlighting.org/buildslaves:

tail -f /var/lib/buildbot/slaves/ola/twistd.log

Other Platforms

Build Slave Installation

The easiest way to get started is by using easy_install. You need to have the Python headers available, so on Debian / Ubuntu run:

sudo apt-get install python-dev

Then install buildbot-slave:

easy_install buildbot-slave

Slave Configuration

Setup a new user:

sudo -s 
adduser ola-build-slave  # use a temp password for now
vi /etc/shadow  # delete the password entry

Setup the slave:

su ola-build-slave
cd ~
buildslave create-slave ola-slave buildbot.openlighting.org:9989 <slave user> <slave password>

Edit ola-slave/info/admin and ola-slave/info/host so your slave shows up correctly.

Then start the slave:

buildslave start ola-slave

You can look at the logs by running

 tail -f ola-slave/twistd.log

At this point you can go to http://buildbot.openlighting.org/buildslaves and you should see your slave connected. It's probably worth asking someone to kick off a build at this point so we can check your slave is working.

Finally, if everything looks good, configure your slave to launch on startup by editing the crontab for the ola-build-slave user (crontab -e). Add the following line:

@reboot buildbot start /home/ola-build-slave/ola-slave

Enabling the C++ Lint Checker

The lint checker enforces C++ style. We only run this once per change but it's good to have multiple lint-enabled hosts in case one is down.

Download the cpplint checker and put it in /usr/local/bin

wget http://google-styleguide.googlecode.com/svn/trunk/cpplint/cpplint.py
sudo cp cpplint.py /usr/local/bin
chmod a+x /usr/local/bin/cpplint.py

Finally drop Simon an email asking him to enable C++ lint for your slave.

Enabling the Javascript Lint Checker

The lint checker enforces Javascript style. We only run this once per change but it's good to have multiple lint-enabled hosts in case one is down.

Install the gjslint checker by following the relevant instructions here: https://developers.google.com/closure/utilities/docs/linter_howto

Finally drop Simon an email asking him to enable Javascript lint for your slave.

Enabling the heap checker

First we need libunwind:

apt-get install libunwind7-dev 

Then download the latest gperftools from https://code.google.com/p/gperftools/downloads/list .

wget ....
tar -zxf gperftools-2.0.tar.gz
cd gperftools-2.0
./configure
make
sudo make install
sudo ldconfig

Finally drop Simon an email asking him to enable the heap checker for your slave.