We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
Difference between revisions of "OLA Performance Stats"
From wiki.openlighting.org
| Line 15: | Line 15: | ||
=== Arduino RGB Mixer === | === Arduino RGB Mixer === | ||
| − | This can only do about 22 full frames per second. | + | This can only do about 22 full frames per second. The loop time increases to 2000uS. |
| + | |||
=== RPC Throughput === | === RPC Throughput === | ||
Revision as of 19:33, 26 March 2010
This is a brain dump of random OLA performance metrics. Unless otherwise mentioned these were performed on a MacBook Pro 2.4GHz Intel Core 2 Duo
Idle Test
Receiving an Streaming DMX update for a non-active universe with 512 channels is 40-50uS. This represents the best-case turn around time for an RPC.
UsbPro Test
Patching the Usb Pro Output port causes the average loop time to increase to 150uS for a 512 channel packet. 200 frames/second is about the upper limit the Usb Pro can support.
E1.31 Test
Patching an E1.31 Output Port results in a loop time of 125uS @ 200fps. OLA can sustain at least 2200 frames per second in this mode, where the loop time drops to 70uS. This was tested with a single universe and 4 universes.
Arduino RGB Mixer
This can only do about 22 full frames per second. The loop time increases to 2000uS.
RPC Throughput
At least 12k rpcs/second.
TODO
The average isn't the best measurement, we should use the working time for just dmx queries.
