We've launched our new site at www.openlighting.org. This wiki will remain and be updated with more technical information.
Difference between revisions of "Avolite DMX Splitter"
From wiki.openlighting.org
(the specs was listed twice, removed the copy) |
|||
| Line 4: | Line 4: | ||
| − | The Avolites DMX splitter is now available in two versions: Rack or Truss mounting | + | The [[Avolites]] DMX splitter is now available in two versions: Rack or Truss mounting |
| − | Avolites DMX splitters will buffer, multiply, isolate and protect console DMX outputs. | + | [[Avolites]] DMX splitters will buffer, multiply, isolate and protect console DMX outputs. |
The device operates from any AC mains voltage ( 85 to 265v ) with a robust 2 amp internal power supply. Standard units have DMX in, DMX loop out, Terminate On switch and LED, plus additional Power and Data LED's. | The device operates from any AC mains voltage ( 85 to 265v ) with a robust 2 amp internal power supply. Standard units have DMX in, DMX loop out, Terminate On switch and LED, plus additional Power and Data LED's. | ||
| Line 12: | Line 12: | ||
The Rack splitter provides four pairs of outputs and the Truss splitter three pairs. These are optically isolated from each other and can be standard 5 pin or 3 pin or 3 pin reverse. Internally, the circuit board carries spare IC's enabling you to get up-and-running again very fast in the case of an emergency. | The Rack splitter provides four pairs of outputs and the Truss splitter three pairs. These are optically isolated from each other and can be standard 5 pin or 3 pin or 3 pin reverse. Internally, the circuit board carries spare IC's enabling you to get up-and-running again very fast in the case of an emergency. | ||
| − | + | Specifications | |
* "DMX in" and "DMX loop out" | * "DMX in" and "DMX loop out" | ||
* High brightness power and data LED's | * High brightness power and data LED's | ||
| Line 18: | Line 18: | ||
* Internal circuit board carries spare IC's | * Internal circuit board carries spare IC's | ||
* Operates from any AC mains voltage from 85-265 volts | * Operates from any AC mains voltage from 85-265 volts | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
[[Category:Splitters & Mergers]] | [[Category:Splitters & Mergers]] | ||
Latest revision as of 07:37, 13 November 2008
Link: http://www.avolites.org.uk/products/dmx-splitters.htm
{{ #if: | 
}}{{ #if: | 
}}{{ #if: | 
}}{{ #if: | 
}}{{ #if: yes | 
}}{{ #if: | 
}}{{ #if: | 
}}{{ #if: | 
}}{{ #if: | 
}}
The Avolites DMX splitter is now available in two versions: Rack or Truss mounting
Avolites DMX splitters will buffer, multiply, isolate and protect console DMX outputs.
The device operates from any AC mains voltage ( 85 to 265v ) with a robust 2 amp internal power supply. Standard units have DMX in, DMX loop out, Terminate On switch and LED, plus additional Power and Data LED's.
The Rack splitter provides four pairs of outputs and the Truss splitter three pairs. These are optically isolated from each other and can be standard 5 pin or 3 pin or 3 pin reverse. Internally, the circuit board carries spare IC's enabling you to get up-and-running again very fast in the case of an emergency.
Specifications
- "DMX in" and "DMX loop out"
- High brightness power and data LED's
- Standard XLR5 ( optional XLR3 or XLR3 reverse polarity )
- Internal circuit board carries spare IC's
- Operates from any AC mains voltage from 85-265 volts
