USBone

Link: http://www.madrix.com/en/home/products/usbone.html
Made by: inoage
{{ #if: | }}{{ #if: yes | }}{{ #if: | }}{{ #if: | }}{{ #if: yes | }}{{ #if: yes | }}{{ #if: | }}{{ #if: | }}{{ #if: | }}

One of the world's smallest USB-to-DMX512 or DMX512-IN interfaces. Made in Germany.

The USBone allows you to control 512 DMX channels using MADRIX.
But an additional MADRIX KEY (i.e. a software license) is necessary.

• DMX-IN/OUT with 5-pin NEUTRIK XLR Port This device allows you to send or receive data via MADRIX using 512 DMX channels. A gender changer with 5-pin male to 3-pin or 5-pin male is required for DMX-IN. • USB 2.0 Standard The latest USB 2.0 standard is fully supported to allow for a higher maximum speed of 480Mbit/s. • Power Over USB The interface is powered directly via the USB port and does not need an additional power supply. • High Quality The USBone represents high quality made in Germany and is very reliable.

• Hot Swapping & Plug and Play Devices can be connected to and disconnected from the computer during use and without a reboot. • Remote Control MADRIX can be controlled remotely using the built-in DMX-IN protocols. • Frame Rate Stability Up to 60 devices can be connected to a single USB host controller without having any frame rate problems. (60 DMX512 interfaces amount to 30,720 DMX channels.) Please connect every USBone to an active USB 2.0 port or use an USB 2.0 hub with a power supply.

Related Products:

• MADRIX
• NEO